R2511-HP MSR Router Series MPLS Command Reference(V5)

327
Table 117 Command output
Field Descri
p
tion
Replier Address of the LSR that replies to the request.
Time Time when the reply was received, in milliseconds.
Type Role of the LSR in the LSP, Ingress, Transit, or Egress.
Downstream Address of the downstream LSR and the outgoing label.
traffic-eng
Use traffic-eng to enable IS-IS TE.
Use undo traffic-eng to restore the default.
Syntax
traffic-eng [ level-1 | level-1-2 | level-2 ]
undo traffic-eng [ level-1 | level-1-2 | level-2 ]
Default
IS-IS TE is disabled.
Views
IS-IS view
Default command level
2: System level
Parameters
level-1: Enables Level-1 IS-IS TE.
level-1-2: Enables Level-1-2 IS-IS TE.
level-2: Enables Level-2 IS-IS TE.
NOTE:
If no level is specified, IS-IS TE applies to Level-1-2.
Usage guidelines
To enable IS-IS TE, you must use the cost-style command to configure the IS-IS cost style as wide,
compatible, or wide-compatible. For more information about the cost-style command, see Layer 3—IP
Routing Command Reference.
Examples
# Enable TE for Level-2 IS-IS process 1.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] cost-style compatible
[Sysname-isis-1] traffic-eng level-2