R2511-HP MSR Router Series MPLS Command Reference(V5)

328
L2VPN access to L3VPN or IP backbone
configuration commands
default
Use default to restore the default settings for the current interface.
Syntax
default
Views
VE-L2VPN-Terminate interface view, VE-L3VPN-Access interface view, VE-L3VPN-Access subinterface
view
Default command level
2: System level
Usage guidelines
This command might fail to restore the default settings for some commands for reasons such as command
dependencies and system restrictions. You can use the display this command in interface view to check
for these commands. Use their undo forms or follow the command reference to individually restore their
default settings. If your restoration attempt still fails, follow the error message to resolve the problem.
CAUTION:
The default command might interrupt ongoing network services. Make sure you are fully aware of the
impacts of this command when you execute it on a live network.
Examples
# Restore the default settings for interface VE-L2VPN-Terminate 100.
<Sysname> system-view
[Sysname] interface ve-l2vpn-terminate 100
[Sysname-VE-L2VPN-Terminate100] default
This command will restore the default settings. Continue? [Y/N]:y
# Restore the default settings for interface VE-L3VPN-Access 100.
<Sysname> system-view
[Sysname] interface ve-l3vpn-access 100
[Sysname-VE-L3VPN-Access100] default
This command will restore the default settings. Continue? [Y/N]:y
description
Use description to specify a description for the interface.
Use undo description to restore the default.