R2511-HP MSR Router Series MPLS Command Reference(V5)

330
display interface { ve-l2vpn-terminate interface-number | ve-l3vpn-access { interface-number |
interface-number.subnumber } } [ brief ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
ve-l2vpn-terminate: Displays information about terminating VE interfaces.
ve-l3vpn-access: Displays information about access VE interfaces.
interface-number: Specifies the number of a terminating VE interface or an access VE interface, in the
range of 1 to 8192.
interface-number.subnumber: Specifies the number of an access VE subinterface. The interface-number
argument is the number of an interface, in the range of 1 to 8192, and subnumber is the number of a
subinterface created on the interface, in the range of 0 to 1023.
brief: Displays brief interface information. If you do not specify this keyword, the command displays
detailed interface information.
down: Displays information about the interfaces in down state and the causes. If you do not specify this
keyword, the command displays information about interfaces in all states.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If you do not specify an interface type (by ve-l2vpn-terminate or ve-l3vpn-access), the command
displays information about all interfaces.
If you specify an interface type but do not specify an interface number (by interface-number or
interface-number.subnumber), the command displays information about all interfaces of the specified
type.
If you specify both an interface type and an interface number, the command displays information about
the specified interface.
Examples
# Display information about interface VE-L2VPN-Terminate 100.
<Sysname> display interface ve-l2vpn-terminate 100
VE-L2VPN-Terminate100 current state: UP
Line protocol current state: UP
Description: VE-L2VPN-Terminate100 Interface
The Maximum Transmit Unit is 1500
Internet protocol processing : disabled
IP Packet Frame Type: PKTFMT_ETHNT_2, Hardware Address: 000f-e20c-0a58