R2511-HP MSR Router Series MPLS Command Reference(V5)

335
interface ve-l2vpn-terminate
Use interface ve-l2vpn-terminate to create a terminating VE interface and enter terminating VE interface
view.
Use undo interface ve-l2vpn-terminate to delete the specified terminating VE interface.
Syntax
interface ve-l2vpn-terminate interface-number
undo interface ve-l2vpn-terminate interface-number
Views
System view
Default command level
2: System level
Parameters
interface-number: Specifies the number of a terminating VE interface, in the range of 1 to 8192.
Usage guidelines
A terminating VE interface in a VE group cannot be directly deleted. To delete it, remove the terminating
VE interface from the VE group first.
After you create an MPLS L2VPN connection on a terminating VE interface in a VE group, you cannot
remove the terminating VE interface from the VE group. For more information about MPLS L2VPN, see
MPLS Configuration Guide.
Examples
# Create terminating VE interface VE-L2VPN-Terminate 100, and enter terminating VE interface view.
<Sysname> system-view
[Sysname] interface ve-l2vpn-terminate 100
[Sysname-VE-L2VPN-Terminate100]
interface ve-l3vpn-access
Use interface ve-l3vpn-access to create an access VE interface or subinterface, and enter access VE
interface or subinterface view.
Use undo interface ve-l3vpn-access to delete the specified access VE interface or subinterface.
Syntax
interface ve-l3vpn-access { interface-number | interface-number.subnumber }
undo interface ve-l3vpn-access { interface-number | interface-number.subnumber }
Views
System view
Default command level
2: System level
Parameters
interface-number: Specifies the number of an access VE interface, in the range of 1 to 8192.