R2511-HP MSR Router Series MPLS Command Reference(V5)

337
[Sysname] interface ve-l2vpn-terminate 100
[Sysname-VE-L2VPN-Terminate100] mtu 1430
# Set the MTU for interface VE-L3VPN-Access 100 to 1430 bytes.
<Sysname> system-view
[Sysname] interface ve-l3vpn-access 100
[Sysname-VE-L3VPN-Access100] mtu 1430
reset counters interface
Use reset counters interface to clear interface statistics.
Syntax
reset counters interface [ ve-l2vpn-terminate [ interface-number ] | ve-l3vpn-access [ interface-number
| interface-number.subnumber ] ]
Views
User view
Default command level
2: System level
Parameters
ve-l2vpn-terminate: Clears statistics on the terminating VE interfaces.
ve-l3vpn-access: Clears statistics on the access VE interfaces.
interface-number: Specifies the number of a terminating VE interface or access VE interface, in the range
of 1 to 8192.
interface-number.subnumber: Specifies the number of an access VE subinterface. The interface-number
argument specifies the number of an access VE interface, in the range of 1 to 8192. The subnumber
argument specifies the number of a subinterface created on the access VE interface, in the range of 0 to
1023.
Usage guidelines
Before collecting traffic statistics for a specific period of time on an interface, clear the old statistics first
by using this command.
• If you do not specify an interface type (by ve-l2vpn-terminate or ve-l3vpn-access), this command
clears statistics for all interfaces.
• If you specify an interface type but do not specify an interface number (by interface-number or
interface-number.subnumber), this command clears statistics for all interfaces of that type.
• If you specify both an interface type and an interface number, this command clears statistics for the
specified interface or subinterface.
Examples
# Clear statistics on interface VE-L2VPN-Terminate 100.
<Sysname> reset counters interface ve-l2vpn-terminate 100
# Clear statistics on interface VE-L3VPN-Access 100.
<Sysname> reset counters interface ve-l3vpn-access 100