R2511-HP MSR Router Series MPLS Command Reference(V5)

338
shutdown
Use shutdown to shut down the interface.
Use undo shutdown to bring up the interface.
Syntax
shutdown
undo shutdown
Default
An interface is in the up state.
Views
VE-L2VPN-Terminate interface view, VE-L3VPN-Access interface view, VE-L3VPN-Access subinterface
view
Default command level
2: System level
Examples
# Shut down interface VE-L2VPN-Terminate 100.
<Sysname> system-view
[Sysname] interface ve-l2vpn-terminate 100
[Sysname-VE-L2VPN-Terminate100] shutdown
# Shut down interface VE-L3VPN-Access 100.
<Sysname> system-view
[Sysname] interface ve-l3vpn-access 100
[Sysname-VE-L3VPN-Access100] shutdown
ve-group
NOTE:
This command is unavailable for access VE subinterfaces.
Use ve-group to add a terminating VE interface or an access VE interface to a VE group.
Use undo ve-group to remove the VE interface from the VE group.
Syntax
ve-group ve-group-id
undo ve-group
Default
A VE interface does not belong to any VE group.
Views
VE-L2VPN-Terminate interface view, VE-L3VPN-Access interface view
Default command level
2: System level