R2511-HP MSR Router Series MPLS Command Reference(V5)

339
Parameters
ve-group-id: Specifies the ID of a VE group, in the range of 1 to 8192.
Usage guidelines
One VE group can contain only one terminating VE interface and one access VE interface. The
terminating VE interface is used to terminate the MPLS L2VPN and the access VE interface is used to
access the MPLS L3VPN or IP backbone.
Examples
# Add interface VE-L2VPN-Terminate 100 to VE group 100 to terminate MPLS L2VPN.
<Sysname> system-view
[Sysname] interface ve-l2vpn-terminate 100
[Sysname-VE-L2VPN-Terminate100] ve-group 100
# Add interface VE-L3VPN-Access 100 to VE group 100 to access the MPLS L3VPN or IP backbone.
<Sysname> system-view
[Sysname] interface ve-l3vpn-access 100
[Sysname-VE-L3VPN-Access100] ve-group 100