R2511-HP MSR Router Series MPLS Command Reference(V5)

30
Field Descri
p
tion
Last Change Time Time of the last update of the entry.
Service
Service type and status.
The service type is Statistics. The service status can be Succeeded (service has
been enabled successfully) or Failed (service failed to be enabled).
display mpls nhlfe reflist
Use display mpls nhlfe reflist to display the usage information for the NHLFE entries.
Syntax
display mpls nhlfe reflist token [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
token: Specifies an NHLFE entry index in the range of 0 to 32767.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the usage information for the specified NHLFE entry.
<Sysname> display mpls nhlfe reflist 11
Total reference node: 7
No. Type Key-Info
-------------------------------------------------------------
1 ILM 1023(Inlabel) GE1/1(In-If)
2 FTN 1(VPN ID) 2.2.2.2/32
3 LPW ----(SRV ID) GE1/2(Private-If)
4 FRR 11(Token) ----
5 INN 11(Token) ----
6 OAM 1(Index) ----
7 BFD 1(BFD Discr) ----
Table 19 Command output
Field Descri
p
tion
Total reference node Total number of associated nodes.
Type Type of the associated node.