R2511-HP MSR Router Series MPLS Command Reference(V5)

31
Field Descri
p
tion
Key-Info Key parameters of the entry.
NOTE:
A
n asterisk (*) before the number of a node entry means that the node is invalid and is to be deleted..
Table 20 Types of associated nodes and their key parameters
Node t
yp
e Descri
p
tion Ke
y
p
arameter
FTN FEC to NHLFE mapping.
• VPN ID—VPN instance ID
• Address prefix/mask
ILM Incoming label mapping.
• In-Label—Incoming label
• In-If—Incoming interface
LPW Sending entries of VPWS PW.
• SRV ID—Service instance ID
• Private-If—Private network interface
FRR Primary NHLFE of FRR. Token: Token of the primary NHLFE
INN Inner-layer NHLFE of layered LSP. Token: Token of the inner NHLFE
OAM
Check the connectivity of the CR-LSP
corresponding to the NHLFE through
OAM.
Index: OAM instance index
BFD
Check the connectivity of the NHLFE
through BFD.
BFD Discr: Local discriminator value of the BFD
session
display mpls route-state
Use display mpls route-state to display LSP information for routes.
Syntax
display mpls route-state [ vpn-instance vpn-instance-name ] [ dest-addr mask-length ] [ | { begin |
exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
vpn-instance vpn-instance-name: Displays the LSP information for the routes on the specified VPN. The
vpn-instance-name argument is the instance name of an MPLS L3VPN, a case-sensitive string of 1 to 31
characters.
dest-addr mask-length: Displays the LSP information for routes to a destination address. The dest-addr
argument is the destination IP address. The value range for the mask length is 0 to 32.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.