R2511-HP MSR Router Series MPLS Command Reference(V5)

38
NOTE:
•
On an ingress, no statistics are collected in the incoming direction and the start time and end time in the
InSegment part of the command output are both 0.
• On an egress, no statistics are collected in the outgoing direction and the start time and end time in the
OutSegment part of the command output are both 0.
Related commands
statistics interval
dscp
Use dscp to configure a DSCP value for outgoing LDP packets.
Use undo dscp to restore the default.
Syntax
dscp dscp-value
undo dscp
Default
The DSCP value for outgoing LDP packets is 48.
Views
MPLS LDP view
Default command level
2: System level
Parameters
dscp-value: Specifies the DSCP value for outgoing LDP packets, in the range of 0 to 63.
Examples
# Set the DSCP for outgoing LDP packets to 56.
<Sysname> system-view
[Sysname] mpls lsr-id 1.1.1.1
[Sysname] mpls
[Sysname-mpls] quit
[Sysname] mpls ldp
[Sysname-mpls-ldp] dscp 56
du-readvertise
Use du-readvertise to enable label re-advertisement for DU mode.
Use undo du-readvertise to disable the function.
Syntax
du-readvertise
undo du-readvertise