R2511-HP MSR Router Series MPLS Command Reference(V5)

51
Default command level
2: System level
Parameters
remote-peer-name: Specifies a name for the remote peer, a case-insensitive string of 1 to 32 characters.
Examples
# Create a remote peer entity named BJI and enter MPLS LDP remote peer view.
<Sysname> system-view
[Sysname] mpls ldp remote-peer BJI
[Sysname-mpls-ldp-remote-bji]
Related commands
remote-ip
mpls ldp timer hello-hold
Use mpls ldp timer hello-hold to set a Hello timer.
Use undo mpls ldp timer hello-hold to restore the default.
Syntax
mpls ldp timer hello-hold value
undo mpls ldp timer hello-hold
Default
The value of the link Hello timer is 15 seconds and that of the targeted Hello timer is 45 seconds.
Views
Interface view, MPLS LDP remote peer view
Default command level
2: System level
Parameters
value: Specifies the value of the Hello timer, in the range of 1 to 65535 seconds.
Usage guidelines
In interface view, you set the link Hello timer. In MPLS LDP remote peer view, you set the targeted Hello
timer.
Changing the values of the Hello timers does not affect any existing session.
Examples
# Set the link Hello timer to 100 seconds on Ethernet 1/1.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] mpls
[Sysname-Ethernet1/1] mpls ldp
[Sysname-Ethernet1/1] mpls ldp timer hello-hold 100
# Set the targeted Hello timer to 1000 seconds.
<Sysname> system-view