R2511-HP MSR Router Series MPLS Command Reference(V5)

74
Table 25 Command output
Field Descri
p
tion
Origin codes
Route origin codes:
• i – IGP—The network layer reachability information is from within
the AS.
• e – EGP—The network layer reachability information is learned
through EGP.
• ? – incomplete—The network layer reachability information is
learned through other ways.
bgp.l2vpn Number of remote CEs in the BGP L2VPN.
CE ID CE number in the VPN.
nexthop IP address of the next hop.
pref Local preference.
as-path AS path of the route.
# Display brief information about L2VPN peers in the BGP routing table.
<Sysname> display bgp l2vpn peer
BGP local router ID : 4.4.4.9
Local AS number : 100
Total number of peers : 1 Peers in established state : 0
Peer V AS MsgRcvd MsgSent OutQ PrefRcv Up/Down State
3.3.3.9 4 100 0 0 0 0 00:01:07 Active
Table 26 Command output
Field Descri
p
tion
BGP local router ID ID of the local BGP router.
Peers in established state
Number of peers with BGP sessions in the state of
established.
Peer IP address of the peer.
V BGP version that the peer is using.
AS AS number.
MsgRcvd Number of messages received.
MsgSent Number of messages sent.
OutQ Number of messages waiting to be sent to the peer.
PrefRcv Number of prefixes received.
Up/Down Duration that the BGP session is in the current status.
State
Status of the peer: Idle, Connect, Active, OpenSent,
OpenConfirm, and Established.
# Display detailed information about L2VPN peer 3.3.3.9 in the BGP routing table.