R2511-HP MSR Router Series MPLS Command Reference(V5)

76
Field Descri
p
tion
Address family L2VPN L2VPN address family.
Received
Total number of received messages and that of
received update messages.
Sent
Total number of sent messages and that of received
update messages.
Maximum allowed prefix number Maximum number of routes allowed.
Threshold
When the number of IP prefixes received by the device
to the maximum number of routes allowed by the
device reaches this threshold value, the device
generates a prompt.
Peer Preferred Value Preferred value specified for routes from the peer.
BFD Indicates whether BFD is enabled for the peer.
Routing policy configured Routing policy specified for the peer.
# Display L2VPN information with the RD being 100:1 in the BGP routing table.
<Sysname> display bgp l2vpn route-distinguisher 100:1
BGP Local router ID : 2.2.2.9, local AS number : 100
Origin codes:i - IGP, e - EGP, ? - incomplete
bgp.l2vpn: 1 destination
CE ID Label Offset Label Base nexthop pref as-path
4 0 132096 3.3.3.9 100
Table 28 Command output
Field Descri
p
tion
Origin codes
Route origin codes:
• i – IGP—The network layer reachability information is from
within the AS.
• e – EGP—The network layer reachability information is
learned through EGP.
• ? – incomplete—The network layer reachability information is
learned through other ways.
bgp.l2vpn Number of remote CEs in the BGP L2VPN.
CE ID CE number in the VPN.
nexthop IP address of the next hop.
pref Preference.
as-path AS path of the route.
# Display L2VPN information with the RD being 100:1 and the CE ID being 4 in the BGP routing table.
<Sysname> display bgp l2vpn route-distinguisher 100:1 ce-id 4
BGP Local router ID : 2.2.2.9, local AS number : 100
Origin codes:i - IGP, e - EGP, ? - incomplete
CE ID Label Offset Label Base nexthop pref as-path
1 0 8202 3.3.3.9 100