R2511-HP MSR Router Series MPLS Command Reference(V5)

82
Interface Encap Type State VC Type
Vlan10 vlan up ccc
# Display interface information for Kompella VCs.
<Sysname> display l2vpn ccc-interface vc-type bgp-vc
Total ccc-interface of BGP VC: 1
up (1), down (0)
Interface Encap Type State VC Type
S2/1 ppp up bgp-vc
# Display information about the interfaces that are used by static VCs and in up state.
<Sysname> display l2vpn ccc-interface vc-type svc-vc up
Total ccc-interface of SVC VC: 1
up (1), down (0)
Interface Encap Type State VC Type
S2/2 ppp up static-vc
Table 33 Command output
Field Descri
p
tion
Total ccc-interface of XXX VC Total number of interfaces with VC type of xxx.
Interface Name of the interface.
Encap Type Encapsulation type of the interface.
State Status of the interface.
display mpls l2vc
Use display mpls l2vc to display information about Martini VCs configured on the device.
Syntax
display mpls l2vc [ interface interface-type interface-number [ service-instance instance-id ] |
remote-info ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface interface-type interface-number: Specifies the interface connecting the CE by the interface type
and number.
service-instance instance-id: Specifies a service instance by its ID in the range of 1 to 4094.
remote-info: Displays the Martini VC information received from the remote peer.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.