R2511-HP MSR Router Series MPLS Command Reference(V5)

89
Usage guidelines
If you do not specify any parameter, the command displays information about all Kompella VCs.
Examples
# Display information about all Kompella VCs.
<Sysname> display mpls l2vpn connection
1 total connections,
connections: 1 up, 0 down, 0 local, 1 remote, 0 unknown
VPN name: vpn1,
1 total connections,
connections: 1 up, 0 down, 0 local, 1 remote, 0 unknown
CE name: ce1, id: 1,
Rid type status peer-id route-distinguisher intf
4 rmt up 3.3.3.9 100:1 S2/0
Table 42 Command output
Field Descri
p
tion
connections
Connection statistics, including the number of connections in the state of
Up, the number of connections in the state of Down, the number of local
connections, the number of remote connections, and the number of
unknown connections.
VPN name Name of the MPLS L2VPN.
CE name Name of the local CE.
id ID of the local CE.
Rid ID of the remote CE.
type Type of the connection.
status Status of the connection.
peer-id IP address of the peer.
intf Interface for the connection.
# Display information about Kompella VCs for VPN vpn1.
<Sysname> display mpls l2vpn connection vpn-name vpn1
VPN name: vpn1,
1 total connections,
connections: 1 up, 0 down, 0 local, 1 remote, 0 unknown
CE name: ce1, id: 1,
Rid type status peer-id route-distinguisher intf
4 rmt up 3.3.3.9 100:1 S2/0
For more information about the output fields of the command, see Table 26.
# Display information about Kompella VCs on interface Serial 2/0.
<Sysname> display mpls l2vpn connection interface Serial 2/0
***Conn-type : remote