R2511-HP MSR Router Series MPLS Configuration Guide(V5)

153
1. Configure the MCE:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter BGP view.
bgp as-number N/A
3. Enter BGP-VPN instance
view.
ipv4-family vpn-instance
vpn-instance-name
N/A
4. Configure an IBGP peer.
peer { group-name | ip-address }
as-number as-number
N/A
5. Configure the system to be
the RR and specify the peer
as the client of the RR.
peer { group-name | ip-address }
reflect-client
Optional.
By default, no RR or RR client is
configured.
After you configure a VPN site as
an IBGP peer of the MCE, the
MCE does not advertise the BGP
routes learned from the VPN site
to other IBGP peers, including
VPNv4 peers. Only when you
configure the VPN site as a client
of the RR (the MCE), does the
MCE advertise routes learned
from it to other IBGP peers.
6. Redistribute remote site
routes advertised by the PE.
import-route protocol
[ process-id | all-processes ]
[ med med-value | route-policy
route-policy-name ] *
By default, no route redistribution
is configured.
7. Configure a filtering policy
to filter the routes to be
advertised.
filter-policy { acl-number |
ip-prefix ip-prefix-name } export
[ direct | isis process-id | ospf
process-id | rip process-id |
static ]
Optional.
By default, BGP does not filter the
routes to be advertised.
8. Configure a filtering policy
to filter the received routes.
filter-policy { acl-number |
ip-prefix ip-prefix-name } import
Optional.
By default, BGP does not filter the
received routes.
2. Configure a VPN site:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter BGP view.
bgp as-number N/A
3. Configure the MCE as the
IBGP peer.
peer { group-name | ip-address }
as-number as-number
N/A
4. Redistribute the IGP routes
of the VPN.
import-route protocol
[ process-id ] [ med med-value |
route-policy route-policy-name ]
*
Optional.
A VPN site must advertise the
VPN network addresses it can
reach to the connected MCE.