R2511-HP MSR Router Series MPLS Configuration Guide(V5)

178
[PE1-tunnel-policy-gre1] quit
[PE1] ip vpn-instance vpn1
[PE1-vpn-instance-vpn1] route-distinguisher 100:1
[PE1-vpn-instance-vpn1] vpn-target 100:1 both
[PE1-vpn-instance-vpn1] tnl-policy gre1
[PE1-vpn-instance-vpn1] quit
[PE1] interface ethernet 1/1
[PE1-Ethernet1/1] ip binding vpn-instance vpn1
[PE1-Ethernet1/1] ip address 10.1.1.2 24
[PE1-Ethernet1/1] quit
# Configure PE 2.
[PE2] tunnel-policy gre1
[PE2-tunnel-policy-gre1] tunnel select-seq gre load-balance-number 1
[PE2-tunnel-policy-gre1] quit
[PE2] ip vpn-instance vpn1
[PE2-vpn-instance-vpn1] route-distinguisher 100:2
[PE2-vpn-instance-vpn1] vpn-target 100:1 both
[PE2-vpn-instance-vpn1] tnl-policy gre1
[PE2-vpn-instance-vpn1] quit
[PE2] interface ethernet 1/1
[PE2-Ethernet1/1] ip binding vpn-instance vpn1
[PE2-Ethernet1/1] ip address 10.2.1.2 24
[PE2-Ethernet1/1] quit
# Configure CE 1.
<CE1> system-view
[CE1] interface ethernet 1/1
[CE1-Ethernet1/1] ip address 10.1.1.1 24
[CE1-Ethernet1/1] quit
# Configure CE 2.
<CE2> system-view
[CE2] interface ethernet 1/1
[CE2-Ethernet1/1] ip address 10.2.1.1 24
[CE2-Ethernet1/1] quit
# Execute the display ip vpn-instance command on the PEs to display the configuration of the VPN
instance. Use the ping command to test connectivity between the PEs and their attached CEs. The
PEs can ping their attached CEs. This example uses PE 1.
[PE1] display ip vpn-instance
Total VPN-Instances configured : 1
VPN-Instance Name RD Create Time
vpn1 100:1 2006/08/13 09:32:45
[PE1] ping -vpn-instance vpn1 10.1.1.1
PING 10.1.1.1: 56 data bytes, press CTRL_C to break
Reply from 10.1.1.1: bytes=56 Sequence=1 ttl=255 time=27 ms
Reply from 10.1.1.1: bytes=56 Sequence=2 ttl=255 time=33 ms
Reply from 10.1.1.1: bytes=56 Sequence=3 ttl=255 time=7 ms
Reply from 10.1.1.1: bytes=56 Sequence=4 ttl=255 time=29 ms
Reply from 10.1.1.1: bytes=56 Sequence=5 ttl=255 time=9 ms
--- 10.1.1.1 ping statistics ---