Manualshelf

R2511-HP MSR Router Series MPLS Configuration Guide(V5)

ManualsBrandsHP ManualsNetwork HardwareHP MSR1003-8 AC Router
251252253254255256257258259260
245
127.0.0.0/8 Direct 0 0 127.0.0.1 InLoop0
127.0.0.1/32 Direct 0 0 127.0.0.1 InLoop0
172.16.10.0/24 OSPF 10 1 10.100.10.2 Vlan2
The output shows that the MCE has learned the private route of VPN 1 through OSPF process 10.
# On the MCE, bind OSPF process 20 to VPN instance vpn2 to learn the routes of VPN 2. The
configuration procedure is similar to that for OSPF process 10.
The following output shows that the MCE has learned the private route of VPN 2 through OSPF:
[MCE] display ip routing-table vpn-instance vpn2
Routing Tables: vpn2
Destinations : 5 Routes : 5
Destination/Mask Proto Pre Cost NextHop Interface
10.100.20.0/24 Direct 0 0 10.100.20.1 Vlan3
10.100.20.1/32 Direct 0 0 127.0.0.1 InLoop0
127.0.0.0/8 Direct 0 0 127.0.0.1 InLoop0
127.0.0.1/32 Direct 0 0 127.0.0.1 InLoop0
172.16.20.0/24 OSPF 10 1 10.100.20.2 Vlan3
3. Configure routing between the MCE and PE 1:
# Configure the ports between the MCE and PE 1 as trunk ports. The configuration procedure is
similar to that described in "Configure routing between the MCE and PE 1:" (Details not shown.)
# Enable BGP
in AS 100 on the MCE, and enter the IPv4 address family view of VPN instance
vpn1.
[MCE] bgp 100
[MCE-bgp] ipv4-family vpn-instance vpn1
# Specify the EBGP peer PE 1 at 30.1.1.2 in AS 200, and redistribute routing information from
OSPF process 10 to BGP.
[MCE-bgp-vpn1] peer 30.1.1.2 as-number 200
[MCE-BGP-vpn1] import-route ospf 10
# On PE 1, enable BGP in AS 200 and specify the MCE as its EBGP peer.
<PE1> system-view
[PE1] bgp 200
[PE1-bgp] ipv4-family vpn-instance vpn1
[PE1-bgp-vpn1] peer 30.1.1.1 as-number 100
[PE1-bgp-vpn1] quit
[PE1-bgp] quit
# On PE 1, display the routing information of VPN instance vpn1.
[PE1] display ip routing-table vpn-instance vpn1
Routing Tables: vpn1
Destinations : 5 Routes : 5
Destination/Mask Proto Pre Cost NextHop Interface
30.1.1.0/24 Direct 0 0 30.1.1.2 Vlan30
30.1.1.2/32 Direct 0 0 127.0.0.1 InLoop0
127.0.0.0/8 Direct 0 0 127.0.0.1 InLoop0
127.0.0.1/32 Direct 0 0 127.0.0.1 InLoop0