R2511-HP MSR Router Series MPLS Configuration Guide(V5)

289
# Each PE and the ASBR PE in the same AS can establish the LDP neighbor relationship. Execute
the display mpls ldp session command on the routers. The output shows that the session status is
Operational. (Details not shown.)
3. Configure a VPN instance on the PEs:
For the same VPN, the route targets for the VPN instance on the PE must match those for the VPN
instance on the ASBR-PE in the same AS. This is not required for PEs in different ASs.
# Configure CE 1.
<CE1> system-view
[CE1] interface ethernet 1/1
[CE1-Ethernet1/1] ipv6 address 2001:1::1 96
[CE1-Ethernet1/1] quit
# Configure PE 1.
[PE1] ip vpn-instance vpn1
[PE1-vpn-instance-vpn1] route-distinguisher 100:1
[PE1-vpn-instance-vpn1] vpn-target 100:1 both
[PE1-vpn-instance-vpn1] quit
[PE1] interface ethernet 1/1
[PE1-Ethernet1/1] ip binding vpn-instance vpn1
[PE1-Ethernet1/1] ipv6 address 2001:1::2 96
[PE1-Ethernet1/1] quit
# Configure CE 2.
<CE2> system-view
[CE2] interface ethernet 1/1
[CE2-Ethernet1/1] ipv6 address 2001:2::1 96
[CE2-Ethernet1/1] quit
# Configure PE 2.
[PE2] ip vpn-instance vpn1
[PE2-vpn-instance-vpn1] route-distinguisher 200:2
[PE2-vpn-instance-vpn1] vpn-target 100:1 both
[PE2-vpn-instance-vpn1] quit
[PE2] interface ethernet 1/1
[PE2-Ethernet1/1] ip binding vpn-instance vpn1
[PE2-Ethernet1/1] ipv6 address 2001:2::2 96
[PE2-Ethernet1/1] quit
# On ASBR-PE 1, create a VPN instance and bind the VPN instance to the interface connected to
ASBR-PE 2. ASBR-PE 1 considers ASBR-PE 2 to be its attached CE.
[ASBR-PE1] ip vpn-instance vpn1
[ASBR-PE1-vpn-vpn1] route-distinguisher 100:1
[ASBR-PE1-vpn-vpn1] vpn-target 100:1 both
[ASBR-PE1-vpn-vpn1] quit
[ASBR-PE1] interface pos 5/1
[ASBR-PE1-POS5/1] ip binding vpn-instance vpn1
[ASBR-PE1-POS5/1] ipv6 address 2002:1::1 96
[ASBR-PE1-POS5/1] quit
# On ASBR-PE 2, create a VPN instance and bind the VPN instance to the interface connected to
ASBR-PE 1. ASBR-PE 2 considers ASBR-PE 1 to be its attached CE.
[ASBR-PE2] ip vpn-instance vpn1