R2511-HP MSR Router Series MPLS Configuration Guide(V5)

365
[RouterB-POS5/0] quit
[RouterB] interface loopback 0
[RouterB-LoopBack0] isis enable 1
[RouterB-LoopBack0] isis circuit-level level-2
[RouterB-LoopBack0] quit
# Configure Router C.
<RouterC> system-view
[RouterC] isis 1
[RouterC-isis-1] network-entity 00.0005.0000.0000.0003.00
[RouterC-isis-1] quit
[RouterC] interface ethernet 1/1
[RouterC-Ethernet1/1] isis enable 1
[RouterC-Ethernet1/1] isis circuit-level level-2
[RouterC-Ethernet1/1] quit
[RouterC] interface pos 5/0
[RouterC-POS5/0] isis enable 1
[RouterC-POS5/0] isis circuit-level level-2
[RouterC-POS5/0] quit
[RouterC] interface loopback 0
[RouterC-LoopBack0] isis enable 1
[RouterC-LoopBack0] isis circuit-level level-2
[RouterC-LoopBack0] quit
# Configure Router D.
<RouterD> system-view
[RouterD] isis 1
[RouterD-isis-1] network-entity 00.0005.0000.0000.0004.00
[RouterD-isis-1] quit
[RouterD] interface ethernet 1/1
[RouterD-Ethernet1/1] isis enable 1
[RouterD-Ethernet1/1] isis circuit-level level-2
[RouterD-Ethernet1/1] quit
[RouterD] interface loopback 0
[RouterD-LoopBack0] isis enable 1
[RouterD-LoopBack0] isis circuit-level level-2
[RouterD-LoopBack0] quit
# Verify that all nodes have learned the host routes of other nodes with LSR IDs as destinations on
Routers, for example, on Router A.
[RouterA] display ip routing-table
Routing Tables: Public
Destinations : 10 Routes : 10
Destination/Mask Proto Pre Cost NextHop Interface
1.1.1.9/32 Direct 0 0 127.0.0.1 InLoop0
2.2.2.9/32 ISIS 15 10 10.1.1.2 Eth1/1
3.3.3.9/32 ISIS 15 20 10.1.1.2 Eth1/1
4.4.4.9/32 ISIS 15 30 10.1.1.2 Eth1/1
10.1.1.0/24 Direct 0 0 10.1.1.1 Eth1/1
10.1.1.1/32 Direct 0 0 127.0.0.1 InLoop0
20.1.1.0/24 ISIS 15 20 10.1.1.2 Eth1/1