R2511-HP MSR Router Series MPLS Configuration Guide(V5)

374
[RouterA-ospf-1-area-0.0.0.0] quit
[RouterA-ospf-1] quit
# Configure Router B.
[RouterB] ospf
[RouterB-ospf-1] opaque-capability enable
[RouterB-ospf-1] area 0
[RouterB-ospf-1-area-0.0.0.0] mpls-te enable
[RouterB-ospf-1-area-0.0.0.0] quit
[RouterB-ospf-1] quit
# Configure Router C.
[RouterC] ospf
[RouterC-ospf-1] opaque-capability enable
[RouterC-ospf-1] area 0
[RouterC-ospf-1-area-0.0.0.0] mpls-te enable
[RouterC-ospf-1-area-0.0.0.0] quit
[RouterC-ospf-1] quit
# Configure Router D.
[RouterD] ospf
[RouterD-ospf-1] opaque-capability enable
[RouterD-ospf-1] area 0
[RouterD-ospf-1-area-0.0.0.0] mpls-te enable
[RouterD-ospf-1-area-0.0.0.0] quit
[RouterD-ospf-1] quit
6. Configure a loose explicit route on Router A.
[RouterA] explicit-path atod enable
[RouterA-explicit-path-atod] next hop 10.1.1.2 include loose
[RouterA-explicit-path-atod] next hop 20.1.1.2 include loose
[RouterA-explicit-path-atod] next hop 30.1.1.2 include loose
[RouterA-explicit-path-atod] quit
7. Configure MPLS TE attributes of links:
# Configure the maximum link bandwidth and maximum reservable bandwidth on Router A.
[RouterA] interface ethernet 1/1
[RouterA-Ethernet1/1] mpls te max-link-bandwidth 10000
[RouterA-Ethernet1/1] mpls te max-reservable-bandwidth 5000
[RouterA-Ethernet1/1] quit
# Configure the maximum link bandwidth and maximum reservable bandwidth on Router B.
[RouterB] interface ethernet 1/1
[RouterB-Ethernet1/1] mpls te max-link-bandwidth 10000
[RouterB-Ethernet1/1] mpls te max-reservable-bandwidth 5000
[RouterB-Ethernet1/1] quit
[RouterB] interface pos 5/0
[RouterB-POS5/0] mpls te max-link-bandwidth 10000
[RouterB-POS5/0] mpls te max-reservable-bandwidth 5000
[RouterB-POS5/0] quit
# Configure the maximum link bandwidth and maximum reservable bandwidth on Router C.
[RouterC] interface ethernet 1/1
[RouterC-Ethernet1/1] mpls te max-link-bandwidth 10000