R2511-HP MSR Router Series MPLS Configuration Guide(V5)

ManualsBrandsHP ManualsNetwork HardwareHP MSR1003-8 AC Router

378

[RouterA-mpls] mpls te

[RouterA-mpls] mpls rsvp-te

[RouterA-mpls] mpls rsvp-te hello

[RouterA-mpls] interface ethernet 1/1

[RouterA-Ethernet1/1] mpls

[RouterA-Ethernet1/1] mpls te

[RouterA-Ethernet1/1] mpls rsvp-te

[RouterA-Ethernet1/1] mpls rsvp-te hello

[RouterA-Ethernet1/1] quit

# Configure Router B.

<RouterB> system-view

[RouterB] mpls lsr-id 2.2.2.9

[RouterB] mpls

[RouterB-mpls] mpls te

[RouterB-mpls] mpls rsvp-te

[RouterB-mpls] mpls rsvp-te hello

[RouterB-mpls] interface ethernet 1/1

[RouterB-Ethernet1/1] mpls

[RouterB-Ethernet1/1] mpls te

[RouterB-Ethernet1/1] mpls rsvp-te

[RouterB-Ethernet1/1] mpls rsvp-te hello

[RouterB-Ethernet1/1] quit

[RouterB] interface ethernet 1/2

[RouterB-Ethernet1/2] mpls

[RouterB-Ethernet1/2] mpls te

[RouterB-Ethernet1/2] mpls rsvp-te

[RouterB-Ethernet1/2] mpls rsvp-te hello

[RouterB-Ethernet1/2] quit

# Configure Router C.

<RouterC> system-view

[RouterC] mpls lsr-id 3.3.3.9

[RouterC] mpls

[RouterC-mpls] mpls te

[RouterC-mpls] mpls rsvp-te

[RouterC-mpls] mpls rsvp-te hello

[RouterC-mpls] interface ethernet 1/1

[RouterC-Ethernet1/1] mpls

[RouterC-Ethernet1/1] mpls te

[RouterC-Ethernet1/1] mpls rsvp-te

[RouterC-Ethernet1/1] mpls rsvp-te hello

[RouterC-Ethernet1/1] quit

4. Configure IS-IS TE. (Details not shown.)

5. Configure the MPLS TE tunnel. (Details not shown.)

6. Configure RSVP-TE GR:

# Configure Router A.

<RouterA> system-view

[RouterA] mpls