R2511-HP MSR Router Series MPLS Configuration Guide(V5)

ManualsBrandsHP ManualsNetwork HardwareHP MSR1003-8 AC Router

381

382

383

384

385

386

387

388

389

390

382

Eth 1/1 10.1.1.2/24

Eth 1/1

30.1.1.1/24

Eth 1/2 20.1.1.1/24 Eth 1/2 20.1.1.2/24

Configuration procedure

1. Configure IP addresses and masks for the interfaces according to Figure 97. (Details not shown.)

2. Enable OSPF to advertise host routes with LSR IDs as destinations. (Details not shown.)

# Verify that all nodes have learned the host routes of other nodes with LSR IDs as destinations.

3. Configure basic MPLS TE, and enable CSPF:

# Configure Router A.

[RouterA] mpls lsr-id 1.1.1.9

[RouterA] mpls

[RouterA-mpls] mpls te

[RouterA-mpls] mpls te cspf

[RouterA-mpls] quit

[RouterA] interface ethernet 1/1

[RouterA-Ethernet1/1] mpls

[RouterA-Ethernet1/1] mpls te

[RouterA-Ethernet1/1] quit

# Configure Router B.

[RouterB] mpls lsr-id 2.2.2.9

[RouterB] mpls

[RouterB-mpls] mpls te

[RouterB-mpls] mpls te cspf

[RouterB-mpls] quit

[RouterB] interface ethernet 1/1

[RouterB-Ethernet1/1] mpls

[RouterB-Ethernet1/1] mpls te

[RouterB-Ethernet1/1] quit

[RouterB] interface ethernet 1/2

[RouterB-Ethernet1/2] mpls

[RouterB-Ethernet1/2] mpls te

[RouterB-Ethernet1/2] quit

# Configure Router C.

[RouterC] mpls lsr-id 3.3.3.9

[RouterC] mpls

[RouterC-mpls] mpls te

[RouterC-mpls] mpls te cspf

[RouterC-mpls] quit

[RouterC] interface ethernet 1/1

[RouterC-Ethernet1/1] mpls

[RouterC-Ethernet1/1] mpls te

[RouterC-Ethernet1/1] quit

[RouterC] interface ethernet 1/2

[RouterC-Ethernet1/2] mpls

[RouterC-Ethernet1/2] mpls te

[RouterC-Ethernet1/2] quit