R2511-HP MSR Router Series MPLS Configuration Guide(V5)

383
# Configure Router D.
[RouterD] mpls lsr-id 4.4.4.9
[RouterD] mpls
[RouterD-mpls] mpls te
[RouterD-mpls] mpls te cspf
[RouterD-mpls] quit
[RouterD] interface ethernet 1/1
[RouterD-Ethernet1/1] mpls
[RouterD-Ethernet1/1] mpls te
[RouterD-Ethernet1/1] quit
4. Configure OSPF TE:
# Configure Router A.
[RouterA] ospf
[RouterA-ospf-1] opaque-capability enable
[RouterA-ospf-1] area 0
[RouterA-ospf-1-area-0.0.0.0] mpls-te enable
[RouterA-ospf-1-area-0.0.0.0] quit
[RouterA-ospf-1] quit
# Configure Router B.
[RouterB] ospf
[RouterB-ospf-1] opaque-capability enable
[RouterB-ospf-1] area 0
[RouterB-ospf-1-area-0.0.0.0] mpls-te enable
[RouterB-ospf-1-area-0.0.0.0] quit
[RouterB-ospf-1] quit
# Configure Router C.
[RouterC] ospf
[RouterC-ospf-1] opaque-capability enable
[RouterC-ospf-1] area 0
[RouterC-ospf-1-area-0.0.0.0] mpls-te enable
[RouterC-ospf-1-area-0.0.0.0] quit
[RouterC-ospf-1] quit
# Configure Router D.
[RouterD] ospf
[RouterD-ospf-1] opaque-capability enable
[RouterD-ospf-1] area 0
[RouterD-ospf-1-area-0.0.0.0] mpls-te enable
[RouterD-ospf-1-area-0.0.0.0] quit
[RouterD-ospf-1] quit
5. Configure MPLS TE attributes of links:
# Configure maximum link bandwidth and maximum reservable bandwidth on Router A.
[RouterA] interface ethernet 1/1
[RouterA-Ethernet1/1] mpls te max-link-bandwidth 10000
[RouterA-Ethernet1/1] mpls te max-reservable-bandwidth 5000
[RouterA-Ethernet1/1] quit
# Configure maximum link bandwidth and maximum reservable bandwidth on Router B.
[RouterB] interface ethernet 1/1