R2511-HP MSR Router Series MPLS Configuration Guide(V5)

388
Unreserved BW [15] = 0 bytes/sec
Bandwidth Constraints:
BC [ 0] =625000 bytes/sec
BC [ 1] = 0 bytes/sec
------------------------------------------------
LSA [ 2 ]
------------------------------------------------
LSA Type : Opq-Area
Opaque Type : 1
Opaque ID : 0
Advertising Router ID : 1.1.1.9
LSA Age : 1118
Length : 28
LSA Options : E O
LS Seq Number : 8000000B
CheckSum : ECBF
MPLS TE Router ID : 1.1.1.9
8. Create a static route to direct traffic to the MPLS TE tunnel:
[RouterA] ip route-static 30.1.1.2 24 tunnel 2 preference 1
# Execute the display ip routing-table command on Router A. The output shows a static route entry
with Tunnel2 as the outgoing interface.
Configuring CR-LSP backup
Network requirements
Set up an MPLS TE tunnel from Router A to Router C. Use CR-LSP hot backup for it.