Manualshelf

R2511-HP MSR Router Series MPLS Configuration Guide(V5)

ManualsBrandsHP ManualsNetwork HardwareHP MSR1003-8 AC Router
401402403404405406407408409410
396
[RouterB-Tunnel5] quit
# Bind the bypass tunnel with the protected interface.
[RouterB] interface ethernet 1/2
[RouterB-Ethernet1/2] mpls te fast-reroute bypass-tunnel tunnel 5
[RouterB-Ethernet1/2] quit
# Execute the display interface tunnel command on Router B. The output shows that Tunnel 5 is up.
# Execute the display mpls lsp command on each router for LSP entries. The output shows that two
LSPs are traversing Router B and Router C.
[RouterA] display mpls lsp
------------------------------------------------------------------
LSP Information: RSVP LSP
------------------------------------------------------------------
FEC In/Out Label In/Out IF Vrf Name
4.4.4.4/32 NULL/1024 -/Eth1/1
[RouterB] display mpls lsp
------------------------------------------------------------------
LSP Information: RSVP LSP
------------------------------------------------------------------
FEC In/Out Label In/Out IF Vrf Name
4.4.4.4/32 1024/1024 Eth1/1/Eth1/2
3.3.3.3/32 NULL/1024 -/POS5/0
[RouterC] display mpls lsp
------------------------------------------------------------------
LSP Information: RSVP LSP
------------------------------------------------------------------
FEC In/Out Label In/Out IF Vrf Name
4.4.4.4/32 1024/3 Eth1/2/Eth1/1
3.3.3.3/32 3/NULL POS5/0/-
[RouterD] display mpls lsp
------------------------------------------------------------------
LSP Information: RSVP LSP
------------------------------------------------------------------
FEC In/Out Label In/Out IF Vrf Name
4.4.4.4/32 3/NULL Eth1/1/-
[RouterE] display mpls lsp
------------------------------------------------------------------
LSP Information: RSVP LSP
------------------------------------------------------------------
FEC In/Out Label In/Out IF Vrf Name
3.3.3.3/32 1024/3 POS5/0/POS5/1
# Execute the display mpls te tunnel command on each router. The output shows that two MPLS TE
tunnels are traversing Router B and Router C.
[RouterA] display mpls te tunnel
LSP-Id Destination In/Out-If Name
1.1.1.1:1 4.4.4.4 -/Eth1/1 Tunnel4
[RouterB] display mpls te tunnel
LSP-Id Destination In/Out-If Name
1.1.1.1:1 4.4.4.4 Eth1/1/Eth1/2 Tunnel4