R2511-HP MSR Router Series MPLS Configuration Guide(V5)

397
2.2.2.2:1 3.3.3.3 -/POS5/0 Tunnel5
[RouterC] display mpls te tunnel
LSP-Id Destination In/Out-If Name
1.1.1.1:1 4.4.4.4 Eth1/2/Eth1/1 Tunnel4
2.2.2.2:1 3.3.3.3 POS5/0/- Tunnel5
[RouterD] display mpls te tunnel
LSP-Id Destination In/Out-If Name
1.1.1.1:1 4.4.4.4 Eth1/1/- Tunnel4
[RouterE] display mpls te tunnel
LSP-Id Destination In/Out-If Name
2.2.2.2:1 3.3.3.3 POS5/0/POS5/1 Tunnel5
# Execute the display mpls lsp verbose command on Router B. The output shows that the bypass
tunnel is bound with the protected interface Ethernet 1/2 and is unused.
[RouterB] display mpls lsp verbose
-------------------------------------------------------------------
LSP Information: RSVP LSP
-------------------------------------------------------------------
No : 1
IngressLsrID : 1.1.1.1
LocalLspID : 1
Tunnel-Interface : Tunnel4
Fec : 4.4.4.4/32
Nexthop : 3.1.1.2
In-Label : 1024
Out-Label : 1024
In-Interface : Ethernet1/1
Out-Interface : Ethernet1/2
LspIndex : 4097
Tunnel ID : 0x22001
LsrType : Transit
Bypass In Use : Not Used
BypassTunnel : Tunnel Index[Tunnel5], InnerLabel[1024]
Mpls-Mtu : 1500
No : 2
IngressLsrID : 2.2.2.2
LocalLspID : 1
Tunnel-Interface : Tunnel5
Fec : 3.3.3.3/32
Nexthop : 3.2.1.2
In-Label : NULL
Out-Label : 1024
In-Interface : ----------
Out-Interface : POS5/0
LspIndex : 4098
Tunnel ID : 0x22002
LsrType : Ingress
Bypass In Use : Not Exists