R2511-HP MSR Router Series MPLS Configuration Guide(V5)

ManualsBrandsHP ManualsNetwork HardwareHP MSR1003-8 AC Router

404

# Configure Router C.

[RouterC] mpls lsr-id 3.3.3.9

[RouterC] mpls

[RouterC-mpls] mpls te

[RouterC-mpls] mpls rsvp-te

[RouterC-mpls] mpls te cspf

[RouterC-mpls] mpls te ds-te mode ietf

[RouterC-mpls] quit

[RouterC] interface ethernet 1/1

[RouterC-Ethernet1/1] mpls

[RouterC-Ethernet1/1] mpls te

[RouterC-Ethernet1/1] mpls rsvp-te

[RouterC-Ethernet1/1] quit

[RouterC] interface pos 5/0

[RouterC-POS5/0] mpls

[RouterC-POS5/0] mpls te

[RouterC-POS5/0] mpls rsvp-te

[RouterC-POS5/0] quit

# Configure Router D.

[RouterD] mpls lsr-id 4.4.4.9

[RouterD] mpls

[RouterD-mpls] mpls te

[RouterD-mpls] mpls rsvp-te

[RouterD-mpls] mpls te cspf

[RouterD-mpls] mpls te ds-te mode ietf

[RouterD-mpls] quit

[RouterD] interface ethernet 1/1

[RouterD-Ethernet1/1] mpls

[RouterD-Ethernet1/1] mpls te

[RouterD-Ethernet1/1] mpls rsvp-te

[RouterD-Ethernet1/1] quit

4. Enable IS-IS TE, and configure IS-IS to receive and send only packets whose cost style is wide:

# Configure Router A.

[RouterA] isis 1

[RouterA-isis-1] cost-style wide

[RouterA-isis-1] traffic-eng level-2

[RouterA-isis-1] quit

# Configure Router B.

[RouterB] isis 1

[RouterB-isis-1] cost-style wide

[RouterB-isis-1] traffic-eng level-2

[RouterB-isis-1] quit

# Configure Router C.

[RouterC] isis 1

[RouterC-isis-1] cost-style wide

[RouterC-isis-1] traffic-eng level-2

[RouterC-isis-1] quit