R2511-HP MSR Router Series MPLS Configuration Guide(V5)

407
Back Up LSPID : -
Auto BW : Disabled Auto BW Freq : -
Min BW : - Max BW : -
Current Collected BW: -
Interfaces Protected: -
VPN Bind Type : NONE
VPN Bind Value : -
Car Policy : Disabled
Tunnel Group : Primary
Primary Tunnel : -
Backup Tunnel : -
Group Status : -
# Execute the display mpls te cspf tedb all command on Router A to display the link information in
the TEDB.
[RouterA] display mpls te cspf tedb all
Maximum Node Supported: 128 Maximum Link Supported: 256
Current Total Node Number: 4 Current Total Link Number: 6
Id MPLS LSR-Id IGP Process-Id Area Link-Count
1 3.3.3.9 ISIS 1 Level-2 2
2 2.2.2.9 ISIS 1 Level-2 2
3 4.4.4.9 ISIS 1 Level-2 1
4 1.1.1.9 ISIS 1 Level-2 1
# Execute the display mpls te link-administration bandwidth-allocation command on Router A to
display interface bandwidth information.
[RouterA] display mpls te link-administration bandwidth-allocation interface
ethernet1/1
Link ID: Ethernet1/1
Max Link Bandwidth : 10000 kbits/sec
Max Reservable Bandwidth PreStandard RDM : 0 kbits/sec
Max Reservable Bandwidth IETF RDM : 10000 kbits/sec
Max Reservable Bandwidth IETF MAM : 0 kbits/sec
Downstream LSP Count : 1
UpStream LSP Count : 1
Downstream Bandwidth : 4000 kbits/sec
Upstream Bandwidth : 0 kbits/sec
IPUpdown Link Status : UP
PhysicalUpdown Link Status : UP
BC PreStandard Mode RDM(kbps) IETF Mode RDM(kbps) IETF Mode MAM(kbps)
0 0 10000 0
1 0 8000 0
2 0 5000 0
3 0 2000 0
TE CLASS CLASS TYPE PRIORITY BW RESERVED(kbps) BW AVAILABLE(kbps)
0 0 7 0 6000
1 1 7 0 4000
2 2 7 0 1000
3 3 7 0 1000
4 0 0 0 6000