R2511-HP MSR Router Series MPLS Configuration Guide(V5)

ManualsBrandsHP ManualsNetwork HardwareHP MSR1003-8 AC Router

409

# Configure Router B.

<RouterB> system-view

[RouterB] mpls lsr-id 2.2.2.2

[RouterB] mpls

[RouterB-mpls] mpls te

[RouterB-mpls] mpls rsvp-te

[RouterB-mpls] mpls te cspf

[RouterB-mpls] quit

[RouterB] interface pos 5/0

[RouterB-POS5/0] mpls

[RouterB-POS5/0] mpls te

[RouterB-POS5/0] mpls rsvp-te

[RouterB-POS5/0] quit

# Configure Router E.

<RouterE> system-view

[RouterE] mpls lsr-id 5.5.5.5

[RouterE] mpls

[RouterE-mpls] mpls te

[RouterE-mpls] mpls rsvp-te

[RouterE-mpls] mpls te cspf

[RouterE-mpls] quit

[RouterE] interface pos 5/0

[RouterE-POS5/0] mpls

[RouterE-POS5/0] mpls te

[RouterE-POS5/0] mpls rsvp-te

[RouterE-POS5/0] quit

[RouterE] interface pos 5/1

[RouterE-POS5/1] mpls

[RouterE-POS5/1] mpls te

[RouterE-POS5/1] mpls rsvp-te

[RouterE-POS5/1] quit

# Configure Router C.

<RouterC> system-view

[RouterC] mpls lsr-id 3.3.3.3

[RouterC] mpls

[RouterC-mpls] mpls te

[RouterC-mpls] mpls rsvp-te

[RouterC-mpls] mpls te cspf

[RouterC-mpls] quit

[RouterC] interface pos 5/0

[RouterC-POS5/0] mpls

[RouterC-POS5/0] mpls te

[RouterC-POS5/0] mpls rsvp-te

[RouterC-POS5/0] quit

5. Create an MPLS TE tunnel on Router B:

Configure IGP shortcut or a static route for the MPLS TE tunnel, so that IP routing prefers the MPLS

TE tunnel interface as the outgoing interface.