R2511-HP MSR Router Series MPLS Configuration Guide(V5)

413
Verifying the configuration
# Execute the display mpls lsp command on Router B. The output shows that the LDP LSP from Router B
to Router C is nested within the MPLS TE tunnel. The outgoing interface of the LDP LSP is the MPLS TE
tunnel interface.
[RouterB] display mpls lsp include 3.3.3.3 32 verbose
----------------------------------------------------------------------
LSP Information: RSVP LSP
----------------------------------------------------------------------
No : 1
IngressLsrID : 2.2.2.2
LocalLspID : 1
Tunnel-Interface : Tunnel4
Fec : 3.3.3.3/32
Nexthop : 3.2.1.2
In-Label : NULL
Out-Label : 1024
In-Interface : ----------
Out-Interface : POS5/0
LspIndex : 3073
Tunnel ID : 0x11000c
LsrType : Ingress
Bypass In Use : Not Exists
BypassTunnel : Tunnel Index[---]
----------------------------------------------------------------------
LSP Information: LDP LSP
----------------------------------------------------------------------
No : 2
VrfIndex :
Fec : 3.3.3.3/32
Nexthop : 10.1.1.1
In-Label : NULL
Out-Label : 3
In-Interface : ----------
Out-Interface : Tunnel4
LspIndex : 6147
Tunnel ID : 0x11000e
LsrType : Ingress
Outgoing Tunnel ID : 0x15000d
Label Operation : PUSH
No : 3
VrfIndex :
Fec : 3.3.3.3/32
Nexthop : 10.1.1.1
In-Label : 1024
Out-Label : 3
In-Interface : ----------