R2511-HP MSR Router Series MPLS Configuration Guide(V5)

427
Configuring interface parameters
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter interface view.
interface interface-type
{ interface-number |
interface-number.subnumber }
N/A
3. Set an MTU for the interface.
mtu mtu-value
Optional.
By default, the interface MTU is 1500
bytes.
4. Configure a description for
the interface.
description text
Optional.
By default, the interface description is
"interface-name Interface."
For example, VE-L2VPN-Terminate100
Interface.
5. Restore the default settings of
the interface.
default Optional.
6. Shut down the interface.
shutdown
Optional.
By default, the interface is enabled.
Displaying and maintaining VE group
Task Command Remarks
Display information about VE
groups.
display ve-group [ ve-group-id ] [ | { begin |
exclude | include } regular-expression ]
Available in any view.
Display information about
terminating or access VE
interfaces.
display interface [ ve-l2vpn-terminate |
ve-l3vpn-access ] [ brief [ down ] ] [ |
{ begin | exclude | include }
regular-expression ]
display interface { ve-l2vpn-terminate
interface-number | ve-l3vpn-access
{ interface-number |
interface-number.subnumber } } [ brief ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view.
Clear statistics on terminating or
access VE interfaces.
reset counters interface
[ ve-l2vpn-terminate [ interface-number ] |
ve-l3vpn-access [ interface-number |
interface-number.subnumber ] ]
Available in user view.
Improved L2VPN access configuration example
This section provides examples for configuring L2VPN access to MPLS L3VPN and IP backbone in
improved mode.