R2511-HP MSR Router Series MPLS Configuration Guide(V5)

ManualsBrandsHP ManualsNetwork HardwareHP MSR1003-8 AC Router

430

[PE1-mpls] quit

[PE1] mpls ldp

[PE1-mpls-ldp] quit

[PE1] interface pos 5/0

[PE1-Pos5/0] mpls

[PE1-Pos5/0] mpls ldp

[PE1-Pos5/0] quit

# Configure the P device.

[P] mpls lsr-id 2.2.2.9

[P] mpls

[P-mpls] lsp-trigger all

[P-mpls] quit

[P] mpls ldp

[P-mpls-ldp] quit

[P] interface pos 5/0

[P-Pos5/0] mpls

[P-Pos5/0] mpls ldp

[P-Pos5/0] quit

[P] interface pos 5/1

[P-Pos5/1] mpls

[P-Pos5/1] mpls ldp

[P-Pos5/] quit

# Configure the PE-agg.

[PEagg] mpls lsr-id 3.3.3.9

[PEagg] mpls

[PEagg-mpls] lsp-trigger all

[PEagg-mpls] quit

[PEagg] mpls ldp

[PEagg-mpls-ldp] quit

[PEagg] interface pos 5/0

[PEagg-Pos5/0] mpls

[PEagg-Pos5/0] mpls ldp

[PEagg-Pos5/0] quit

c. Establish a remote LDP session between PE 1 and PE-agg:

# Configure PE 1.

[PE1] mpls ldp remote-peer 1

[PE1-mpls-ldp-remote-1] remote-ip 3.3.3.9

[PE1-mpls-ldp-remote-1] quit

# Configure the PE-agg.

[PEagg] mpls ldp remote-peer 1

[PEagg-mpls-ldp-remote-1] remote-ip 1.1.1.9

[PEagg-mpls-ldp-remote-1] quit

d. Enable L2VPN and MPLS L2VPN on PE 1 and PE-agg:

# Configure PE 1.

[PE1] l2vpn

[PE1-l2vpn] mpls l2vpn

[PE1-l2vpn] quit