R2511-HP MSR Router Series MPLS Configuration Guide(V5)

69
[CE2-POS5/0] link-protocol ppp
[CE2-POS5/0] ip address 100.1.1.2 24
Verifying the configuration
# Verify that a remote CCC connection has been established on PE 1.
[PE1] display ccc
Total ccc vc : 1
Local ccc vc : 0, 0 up
Remote ccc vc : 1, 1 up
***Name : ce1-ce2
Type : remote
State : up
Intf : POS5/0 (up)
In-label : 100
Out-label : 200
Out-interface : POS5/1
# Verify that CE 1 and CE 2 can ping each other.
[CE1] ping 100.1.1.2
PING 100.1.1.2: 56 data bytes, press CTRL_C to break
Reply from 100.1.1.2: bytes=56 Sequence=1 ttl=255 time=180 ms
Reply from 100.1.1.2: bytes=56 Sequence=2 ttl=255 time=60 ms
Reply from 100.1.1.2: bytes=56 Sequence=3 ttl=255 time=10 ms
Reply from 100.1.1.2: bytes=56 Sequence=4 ttl=255 time=70 ms
Reply from 100.1.1.2: bytes=56 Sequence=5 ttl=255 time=60 ms
--- 100.1.1.2 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 10/76/180 ms
Configuring SVC MPLS L2VPN with the VC encapsulation type
of PPP
Network requirements
CEs are connected to PEs through POS interfaces. The link layer encapsulation protocol is PPP.
Establish an SVC, so CE 1 and CE 2 can exchange Layer 2 packets across the backbone.