R2511-HP MSR Router Series MPLS Configuration Guide(V5)

82
<PE1> display mpls l2vc
Total ldp vc : 2 1 up 0 down 1 blocked
Transport Client Service VC Local Remote
VC ID Intf ID State VC Label VC Label
20 S2/0 -- up 1026 1033
30 S2/0 -- blocked 1027 1050
<PE1> display mpls l2vc interface vlan-interface 10
***VC ID : 20
VC State : up
Destination : 2.2.2.2
Client Intf : Serial2/0 is up
Service ID : --
Local Group ID : 0
Remote Group ID : 0
Local VC Label : 1026
Remote VC Label : 1033
Tunnel Policy : -
Tunnel Type : lsp
Tunnel ID : 0xd2009
Local VCCV CC Type : CW, RA
Local VCCV CV Type : LSPV
Remote VCCV CC Type : CW, RA
Remote VCCV CV Type : LSPV
Backup VC
***VC ID : 30
VC State : blocked
Destination : 3.3.3.3
Local Group ID : 0
Remote Group ID : 0
Local VC Label : 1027
Remote VC Label : 1050
Tunnel Policy : -
Tunnel Type : lsp
Tunnel ID : 0xd2001
Remote VCCV CC Type : CW, RA
Remote VCCV CV Type : LSPV
# Verify that a VC has been established on PE 2.
<PE2> display mpls l2vc
Total ldp vc : 1 1 up 0 down 0 blocked
Transport Client Service VC Local Remote
VC ID Intf ID State VC Label VC Label
20 S2/1 -- up 1033 1026
# Verify that a VC has been established on PE 3.
<PE3> display mpls l2vc
Total ldp vc : 1 1 up 0 down 0 blocked