R2511-HP MSR Router Series Network Management and Monitoring Command Reference(V5)

1
SNMP commands
The following matrix shows the FIPS and hardware compatibility:
Hardware FIPS mode
MSR900 No.
MSR93X No.
MSR20-1X No.
MSR20 Yes.
MSR30 Yes (except the MSR30-16).
MSR50 Yes.
MSR1000 Yes.
display snmp-agent community
Use display snmp-agent community to display SNMPv1 and SNMPv2c community information.
Syntax
display snmp-agent community [ read | write ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
read: Displays information about SNMP read-only communities.
write: Displays information about SNMP read and write communities.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
This command displays the SNMPv1 and SNMPv2c communities that you have created by using the
snmp-agent community command or the snmp-agent usm-user { v1 | v2c } command.
This command is available only for non-FIPS mode.