R2511-HP MSR Router Series Network Management and Monitoring Command Reference(V5)

93
cluster-mac syn-interval
Use cluster-mac syn-interval to set the interval for a management device to send MAC address
negotiation broadcast packets for cluster management.
Syntax
cluster-mac syn-interval interval
Default
The interval is set to 1 minute.
Views
Cluster view
Default command level
2: System level
Parameters
interval: Interval (in minutes) to send MAC address negotiation broadcast packets, in the range of 0 to
30. If the interval is set to 0, the management device does not send broadcast packets to the member
devices.
Usage guidelines
This command can only be executed on the management device.
Examples
# Set the interval for the management device to send MAC address negotiation broadcast packets for
cluster management to 2 minutes on the management device.
<Sysname> system-view
[Sysname] cluster
[Sysname-cluster] ip-pool 10.1.1.1 24
[Sysname-cluster] build aaa
[aaa_0.Sysname-cluster] cluster-mac syn-interval 2
cluster-snmp-agent community
Use cluster-snmp-agent community to configure an SNMP community shared by a cluster and set its
access authority.
Use undo cluster-snmp-agent community to remove a specified community name.
Syntax
cluster-snmp-agent community { read | write } community-name [ mib-view view-name ]
undo cluster-snmp-agent community community-name
Views
Cluster view
Default command level
1: Monitor level