R2511-HP MSR Router Series Network Management and Monitoring Command Reference(V5)

95
privacy: Specifies to authenticate and encrypt a packet.
read-view: Read-only view name, a string of 1 to 32 characters.
write-view: Read-write view name, a string of 1 to 32 characters.
notify-view: View name in which trap messages can be sent. It is a string of 1 to 32 characters.
Usage guidelines
The command can be executed once on the management device only. This configuration is synchronized
to the member devices in the whitelist, which is equivalent to configuring multiple member devices at one
time.
An SNMPv3 group name is retained when a cluster is dismissed or a member device is deleted from the
whitelist.
If the same group name as the current one has been configured on a member device, the current group
name replaces the original one.
Examples
# Create an SNMP group snmpgroup.
<aaa_0.Sysname> system-view
[aaa_0.Sysname] cluster
[aaa_0.Sysname-cluster] cluster-snmp-agent group v3 snmpgroup
cluster-snmp-agent mib-view
Use cluster-snmp-agent mib-view to create or update the MIB view information shared by a cluster.
Use undo cluster-snmp-agent mib-view to delete the MIB view information shared by a cluster.
Syntax
cluster-snmp-agent mib-view included view-name oid-tree
undo cluster-snmp-agent mib-view view-name
Default
The MIB view name shared by a cluster is ViewDefault, in which the cluster can access ISO subtree.
Views
Cluster view
Default command level
1: Monitor level
Parameters
included: Includes MIB view.
view-name: MIB view name, a string of 1 to 32 characters.
oid-tree: MIB subtree. It is a string of 1 to 255 characters, which can only be a variable OID string or
variable name string. OID is composed of a series of integers, indicating where a node is in the MIB tree.
It can uniquely identify an object in a MIB.