R2511-HP MSR Router Series Network Management and Monitoring Command Reference(V5)

97
priv-password: Specifies the privacy password string. This argument is case sensitive. If simple is
specified, it must be a string of 1 to 16 characters. If cipher is specified, it must be a ciphertext string of
1 to 53 characters. If neither cipher nor simple is specified, you set a plaintext string.
Usage guidelines
The command can only be executed once on the management device. This configuration is synchronized
to member devices on the whitelist, which is equivalent to configuring multiple member devices at one
time.
The SNMPv3 group user is retained when a cluster is dismissed or a member device is deleted from the
whitelist.
If the same username as the current one has been configured on a member device, the current username
replaces the original one on the member device.
Examples
# Add a user wang to the SNMP group snmpgroup, set the security level to authentication-needed and
specify the authentication protocol as HMAC-MD5-96 and authentication password as pass.
<aaa_0.Sysname> system-view
[aaa_0.Sysname] cluster
[aaa_0.Sysname-cluster] cluster-snmp-agent usm-user v3 wang snmpgroup
authentication-mode md5 pass
delete-member
Use delete-member to remove a member device from the cluster.
Syntax
delete-member member-number [ to-black-list ]
Views
Cluster view
Default command level
2: System level
Parameters
member-number: Specifies the number of a member device in a cluster. Its value range varies with router
models, as follows:
MSR900 MSR20-1X MSR20 MSR30 MSR50
1 to 32 1 to 32 1 to 32
• MSR30-11E, 30-11F,
30-20, 30-40, and
30-60: 1 to 40
• MSR30-10 and
30-16: 1 to 32
1 to 32
to-black-list: Adds the device removed from a cluster to the blacklist to prevent it from being added to the
cluster again.
Usage guidelines
This command can be executed only on the management device.