R2511-HP MSR Router Series Network Management and Monitoring Command Reference(V5)

2
Examples
# Display information about all SNMPv1 and SNMPv2c communities.
<Sysname> display snmp-agent community
Community name: aa
Group name: aa
Acl:2001
Storage-type: nonVolatile
Community name: bb
Group name: bb
Storage-type: nonVolatile
Community name: userv1
Group name: testv1
Storage-type: nonVolatile
Table 1 Command output
Field Description
Community name
Displays the community name created by using the snmp-agent
community command or the username created by using the
snmp-agent usm-user { v1 | v2c } command.
Group name
SNMP group name:
• If the community is created by using the snmp-agent community
command, the group name is the same as the community name.
• If the community is created by using the snmp-agent usm-user { v1
| v2c } command, the name of the group to which the user belongs
is displayed.
Acl
Number of the ACL that controls the access of the NMSs in the
community to the device.
Only the NMSs with the IP addresses permitted in the ACL can access
the device with the community name.
Storage-type
Storage type:
• volatile—Settings are lost when the system reboots.
• nonVolatile—Settings remain after the system reboots.
• permanent—Settings remain after the system reboots and can be
modified but not deleted.
• readOnly—Settings remain after the system reboots and cannot be
modified or deleted.
• other—Any other storage type.
Related commands
• snmp-agent community
• snmp-agent usm-user { v1 | v2c }