R2511-HP MSR Router Series Network Management and Monitoring Command Reference(V5)

105
|-(P_1/11)++++(P_4/1)[bbb_2.HP:00e0-fc00-0000]
| |
| └-(P_4/1)++++(P_1/7)[Sysname:00e0-fc00-3333]
|
└-(P_1/11)++++(P_1/7)[Sysname:00e0-fc00-3333]
Table 27 Command output
Field Descri
p
tion
PeerPort Peer port.
ConnectFlag Connection flag.
NativePort Local port.
SysName:DeviceMac System name of the device.
<--> normal connect
Normal connection between the device and the management
device.
---> odd connect
Unidirectional connection between the device and the
management device.
**** in blacklist Device is in the blacklist.
???? lost device Lost connection between the device and the management device.
++++ new device
This is a new device, whose identity is to be recognized by the
administrator.
-||- STP discarding STP is blocked.
A new device in the topology is identified based on the standard topology. After you add a device into
a cluster, if you do not use the topology accept command to confirm the current topology and save it as
the standard topology, this device is still regarded as a new device.
display cluster members
Use display cluster members to display information about cluster members.
Syntax
display cluster members [ member-number | verbose ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
member-number: Specifies the number of the member device. Its value range varies with router models,
as follows: