R2511-HP MSR Router Series Network Management and Monitoring Command Reference(V5)

109
Usage guidelines
The command can only be executed on the management device.
Examples
# Configure an FTP server shared by the cluster on the management device. Set 1.0.0.9 as the IP address,
username as ftp, and password as ftp in plain text.
<Sysname> system-view
[Sysname] cluster
[Sysname-cluster] ip-pool 10.1.1.1 24
[Sysname-cluster] build aaa
[aaa_0.Sysname-cluster] ftp-server 1.0.0.9 user-name ftp password simple ftp
holdtime
Use holdtime to configure the holdtime of a device.
Use undo holdtime to restore the default.
Syntax
holdtime hold-time
undo holdtime
Default
The holdtime of a device is 60 seconds.
Views
Cluster view
Default command level
2: System level
Parameters
hold-time: Sets the holdtime in the range of 1 to 255 seconds.
Usage guidelines
This command can only be executed on the management device.
The configuration takes effect on all member devices in a cluster.
Examples
# Set the holdtime to 30 seconds on the management device.
<Sysname> system-view
[Sysname] cluster
[Sysname-cluster] ip-pool 10.1.1.1 24
[Sysname-cluster] build aaa
[aaa_0.Sysname-cluster] holdtime 30
ip-pool
Use ip-pool to configure a private IP address range for cluster members.
Use undo ip-pool to remove the IP address range configuration.