R2511-HP MSR Router Series Network Management and Monitoring Command Reference(V5)

111
Parameters
ip-address: IP address of the logging host.
Usage guidelines
This command can be executed on the management device only.
You must execute the info-center loghost command in system view first for the logging host you
configured to take effect.
For more information about the info-center loghost command, see "Information center commands."
Examples
# Configure the IP address of the logging host shared by a cluster on the management device as
10.10.10.9.
<Sysname> system-view
[Sysname] cluster
[Sysname-cluster] ip-pool 10.1.1.1 24
[Sysname-cluster] build aaa
[aaa_0.Sysname-cluster] logging-host 10.10.10.9
management-vlan
Use management-vlan to specify the management VLAN.
Use undo management-vlan to restore the default.
Syntax
management-vlan vlan-id
undo management-vlan
Default
VLAN 1 is the management VLAN.
Views
System view
Default command level
2: System level
Parameters
vlan-id: ID of the management VLAN, in the range of 1 to 4094.
Usage guidelines
The management VLAN must be specified before a cluster is created. Once a member device is added
to a cluster, the management VLAN configuration cannot be modified. To modify the management VLAN
for a device belonging to a cluster, cancel the cluster-related configurations on the device, specify the
desired VLAN to be the management VLAN, and then re-create the cluster.
For the purpose of security, do not configure the management VLAN as the PVID of the port connecting
the management device and the member devices.
To guarantee the communication within the cluster, ensure VLAN handling consistency on all ports on the
path from a member device or candidate device to the management device. To remove the VLAN tag of
outgoing management VLAN packets, set the management VLAN as the PVID on all the ports, including