R2511-HP MSR Router Series Network Management and Monitoring Command Reference(V5)

113
Parameters
interface-name: ID of the VLAN interface. The value range is the same as that of the existing VLAN
interface ID.
Examples
# Configure VLAN-interface 2 as the network management interface.
<aaa_0.Sysname> system-view
[aaa_0.Sysname] cluster
[aaa_0.Sysname-cluster] nm-interface vlan-interface 2
reboot member
Use reboot member to reboot a specified member device.
Syntax
reboot member { member-number | mac-address mac-address } [ eraseflash ]
Views
Cluster view
Default command level
2: System level
Parameters
member-number: Specifies the number of the member device. Its value range varies with router models,
as follows:
MSR900 MSR20-1X MSR20 MSR30 MSR50
1 to 32 1 to 32 1 to 32
• MSR30-11E, 30-11F,
30-20, 30-40, and
30-60: 1 to 40
• MSR30-10 and
30-16: 1 to 32
1 to 32
mac-address mac-address: MAC address of the member device to be rebooted, which is in the format of
H-H-H.
eraseflash: Deletes the configuration file when the member device reboots.
Usage guidelines
This command can only be executed on the management device.
Examples
# Reboot the member device numbered 2 on the management device.
<Sysname> system-view
[Sysname] cluster
[Sysname-cluster] ip-pool 10.1.1.1 24
[Sysname-cluster] build aaa
[aaa_0.Sysname-cluster] reboot member 2