R2511-HP MSR Router Series Network Management and Monitoring Command Reference(V5)

114
snmp-host
Use snmp-host to configure a shared SNMP host for a cluster.
Use undo snmp-host to cancel the SNMP host configuration.
Syntax
snmp-host ip-address [ community-string read string1 write string2 ]
undo snmp-host
Default
No SNMP host is configured for a cluster.
Views
Cluster view
Default command level
3: Manage level
Parameters
ip-address: IP address of an SNMP host.
string1: Community name of read-only access, a string of 1 to 26 characters.
string2: Community name of read-write access, a string of 1 to 26 characters.
Usage guidelines
This command can only be executed on the management device.
Examples
# Configure a shared SNMP host for the cluster on the management device.
<Sysname> system-view
[Sysname] cluster
[Sysname-cluster] ip-pool 10.1.1.1 24
[Sysname-cluster] build aaa
[aaa_0.Sysname-cluster] snmp-host 1.0.0.9 community-string read 123 write 456
tftp-server
Use tftp-server to configure a shared TFTP server for a cluster.
Use undo tftp-server to cancel the TFTP server of the cluster.
Syntax
tftp-server ip-address
undo tftp-server
Default
No TFTP server is configured.
Views
Cluster view