R2511-HP MSR Router Series Network Management and Monitoring Command Reference(V5)

115
Default command level
2: System level
Parameters
ip-address: IP address of a TFTP server.
Usage guidelines
This command can only be executed on the management device.
Examples
# Configure a shared TFTP server on the management device as 1.0.0.9.
<Sysname> system-view
[Sysname] cluster
[Sysname-cluster] ip-pool 10.1.1.1 24
[Sysname-cluster] build aaa
[aaa_0.Sysname-cluster] tftp-server 1.0.0.9
timer
Use timer to set the interval to send handshake packets.
Use undo timer to restore the default.
Syntax
timer interval
undo timer
Default
The interval to send handshake packets is 10 seconds.
Views
Cluster view
Default command level
2: System level
Parameters
interval: Interval (in seconds) to send handshake packets. The value range for this argument is 1 to 255.
Usage guidelines
This command can only be executed on the management device.
This configuration takes effect on all member devices in a cluster.
Examples
# Configure the interval to send handshake packets as 3 seconds on the management device.
<Sysname> system-view
[Sysname] cluster
[Sysname-cluster] ip-pool 10.1.1.1 24
[Sysname-cluster] build aaa
[aaa_0.Sysname-cluster] timer 3