R2511-HP MSR Router Series Network Management and Monitoring Command Reference(V5)

117
topology restore-from
Use topology restore-from to restore the standard topology.
Syntax
topology restore-from { ftp-server | local-flash }
Views
Cluster view
Default command level
2: System level
Parameters
ftp-server: Restores the standard topology from the FTP server.
local-flash: Restores the standard topology from the local flash.
Usage guidelines
This command can only be executed on the management device.
Make sure the standard topology is correct. The device does not verify the correctness of the topology
data.
Examples
# Restore the standard topology on the management device.
<Sysname> system-view
[Sysname] cluster
[Sysname-cluster] ip-pool 10.1.1.1 24
[Sysname-cluster] build aaa
[aaa_0.Sysname-cluster] topology restore-from local-flash
topology save-to
Use topology save-to to save the standard topology to the FTP server or the local flash.
Syntax
topology save-to { ftp-server | local-flash }
Views
Cluster view
Default command level
2: System level
Parameters
ftp-server: Saves the standard topology to the FTP server.
local-flash: Saves the standard topology to the local flash.
Usage guidelines
The file used to save standard topology on the FTP server or the local flash is named "topology.top,"
which includes both blacklist and whitelist information. A blacklist contains the devices that are
prohibited to be added to a cluster. A whitelist contains devices that can be added to a cluster.