R2511-HP MSR Router Series Network Management and Monitoring Command Reference(V5)

119
CWMP configuration commands
cwmp
Use cwmp to enter CWMP view.
Syntax
cwmp
Views
System view
Default command level
2: System level
Examples
# Enter CWMP view.
<Sysname> system-view
[Sysname] cwmp
cwmp acs password
Use cwmp acs password to configure the password used for connecting to the ACS.
Use undo cwmp acs password to restore the default.
Syntax
cwmp acs password [ cipher | simple ] password
undo cwmp acs password
Default
No password is configured for connecting to the ACS.
Views
CWMP view
Default command level
2: System level
Parameters
cipher: Specifies a ciphertext password.
simple: Specifies a plaintext password.
password: Specifies the password string. This argument is case sensitive. If simple is specified, it must be
a string of 1 to 255 characters. If cipher is specified, it must be a ciphertext string of 1 to 373 characters.
If neither cipher nor simple is specified, you set a plaintext password string.
Usage guidelines
If you use the command multiple times, the password configured most recently takes effect.