R2511-HP MSR Router Series Network Management and Monitoring Command Reference(V5)

121
Default
No username is configured for connecting to the ACS.
Views
CWMP view
Default command level
2: System level
Parameters
username: Specifies the username used for authentication when the CPE connects to the ACS. This
argument must be a case-sensitive string of 1 to 255 characters.
Usage guidelines
If you use the command multiple times, the newly configured username overwrites the previous one.
Examples
# Configure the username used for connecting to the ACS as newname.
<Sysname> system
[Sysname] cwmp
[Sysname-cwmp] cwmp acs username newname
Related commands
cwmp acs password
cwmp cpe connect retry
Use cwmp cpe connect retry to configure the maximum number of attempts the CPE can make to retry a
connection.
Use undo cwmp cpe connect retry to restore the default.
Syntax
cwmp cpe connect retry times
undo cwmp cpe connect retry
Default
No limit is set on the maximum number of connection attempts. The CPE regularly attempts to connect to
the ACS until the connection is set up.
Views
CWMP view
Default command level
2: System level
Parameters
times: Specifies the maximum number of attempts made to retry a connection. The value range is 0 to
100. 0 indicates that no attempt is made to retry a connection.
Examples
# Set the maximum number of connection attempts to 5 for the CPE.
<Sysname> system