R2511-HP MSR Router Series Network Management and Monitoring Command Reference(V5)

122
[Sysname] cwmp
[Sysname-cwmp] cwmp cpe connect retry 5
cwmp cpe connect interface
Use cwmp cpe connect interface to set the interface that connects the CPE to the ACS.
Use undo cwmp cpe connect interface to restore the default.
Syntax
cwmp cpe connect interface interface-type interface-number
undo cwmp cpe connect interface
Default
The CWMP connection interface is the interface that is assigned an IP address first among all interfaces
on the CPE.
Views
CWMP view
Default command level
2: System level
Parameters
interface-type interface-number: Specifies the type and number of the interface that connects the CPE to
the ACS.
Examples
# Specify Ethernet 1/0 as the interface that connects the CPE to the ACS.
<Sysname> system
[Sysname] cwmp
[Sysname-cwmp] cwmp cpe connect interface ethernet 1/0
cwmp cpe inform interval
Use cwmp cpe inform interval to configure the interval at which the CPE sends Inform messages.
Use undo cwmp cpe inform interval to restore the default.
Syntax
cwmp cpe inform interval seconds
undo cwmp cpe inform interval
Default
The Inform message sending interval is 600 seconds.
Views
CWMP view
Default command level
2: System level